Designed by
steyrc
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
- assembly video
- PRINTING INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. 0.2mm layer height.
- Gorbo3 KNEE_socket.STL -print 2x 20%infill
- Gorbo3 HIP_armor.STL -print 2x 20%infill
- Gorbo3 GUN_barrel.STL -print 1x 20%infill
- Gorbo3 GUN_ball.STL -print 1x 40%infill
- Gorbo3 FOOT.STL -print 2x 40%infill
- Gorbo3 TURRET_socket.STL -print 1x 20%infill
- Gorbo3 TURRET_ball.STL -print 1x 40%infill
- Gorbo3 TURRET.STL -print 1x 20%infill
- Gorbo3 LEG_upper_armor_right.STL -print 1x 20%infill, supports needed
- Gorbo3 LEG_upper_armor_left.STL -print 1x 20%infill, supports needed
- Gorbo3 LEG_lower_armor.stl -print 2x 20%infill, supports needed
- Gorbo3 LEG_lower.STL -print 2x 20%infill
- Gorbo3 HULL.STL -print 1x 20%infill
- Gorbo3 HIP_socket.STL -print 2x 20%infill
- Gorbo3 HIP_ball.STL -print 2x 40%infill
Design Files
File Size
Gorbo3 HULL.STL
1.03 MB
Gorbo3 LEG_lower.STL
220 KB
Gorbo3 LEG_lower_armor.stl
897 KB
Gorbo3 LEG_upper_armor_left.STL
839 KB
Gorbo3 LEG_upper_armor_right.STL
795 KB
Gorbo3 TURRET.STL
1.44 MB
Gorbo3 TURRET_ball.STL
168 KB
Gorbo3 TURRET_socket.STL
360 KB
Gorbo3 FOOT.STL
257 KB
Gorbo3 GUN_ball.STL
125 KB
Gorbo3 GUN_barrel.STL
63.1 KB
Gorbo3 HIP_armor.STL
538 KB
Gorbo3 KNEE_socket.STL
159 KB
Gorbo3 HIP_ball.STL
176 KB
Gorbo3 HIP_socket.STL
105 KB
Comments