SCALEPRINT CB-19STONE CHIMNEY 00/H0

Prints (0)

Description

Summary Here we have another of the chimneys for 00/HO models, this one is a stone texture and the base section is 10mm x10mm and the top is about 16mm x 16mm, and is about 30 mm tall with a capping. Is printed in 4 parts to get best detail print then glued together after printing. There are 2 different bases one for 45 degree roofs and one for 60 degree roofs plus there are 3 different caps that can be used on the top I use ABS Acetone mix to glue the parts to the plaster also to glue the plaster together, makes a very versatile glue. Print Settings Supports: Yes Resolution: 0.2 NOZZLE .1 LAYER HEIGHT Notes: I use supports on the 45 degree edges

Design Files

File Size

CB-19-CAP-TUDOR.stl
136 KB
CB-19-CAP-SQUARE-HOLE.stl
155 KB
CB-19-CAP-ROUND-HOLE.stl
142 KB
CB-19-60-ROOF-RIGHT.stl
1.37 MB
CB-19-60-ROOF-LEFT.stl
1.44 MB
CB-19-60-ROOF-FRONT.stl
1.59 MB
CB-19-60-ROOF-BACK.stl
946 KB
CB-19-45-ROOF-RIGHT.stl
1.48 MB
CB-19-45-ROOF-LEFT.stl
1.6 MB
CB-19-45-ROOF-FRONT.stl
1.62 MB
CB-19-45-ROOF-BACK.stl
1.3 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×