Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary This is my pallet, there are many pallets like it, but this one is mine... Wood Pallet; textured Wood Pallet; simple 50mm x 50mm Used a svg wood pattern to etch wood planks; This prints in about 20-45 minute depending on how detailed you want your pallet wood grooves to show up - @ 0.15mm layer height you can see the detail of the nail heads. Overkill, but it turns out to be a nice subtle textured effect. printed in abs; used acetone to 'glue' the planks together. be sure to remember to glue the smooth side down so your texture is on the outer faces; if you want that detail to show up... you could probably print them vertically/upright but it will possibly need a little support between each plank;
Comments