![View Klaus Daume's profile Klaus Daume's avatar](https://assets.pinshape.com/default/avatar-small.jpg)
MakerTron - 3D Printed by Klaus Daume
![MakerTron 3D Print 2056 MakerTron 3D Print 2056](http://assets.pinshape.com/uploads/print_image/file/2056/container_IMG_20151007_114758.jpg)
![MakerTron 3D Print 2053 MakerTron 3D Print 2053](http://assets.pinshape.com/uploads/print_image/file/2053/container_IMG_20151007_114731.jpg)
![MakerTron 3D Print 2054 MakerTron 3D Print 2054](http://assets.pinshape.com/uploads/print_image/file/2054/container_IMG_20151007_114740.jpg)
![MakerTron 3D Print 2055 MakerTron 3D Print 2055](http://assets.pinshape.com/uploads/print_image/file/2055/container_IMG_20151007_114750.jpg)
2369
Printer Used
My Rating
My Thoughts
Everything beside the Feet were sliced with Slic3r. The Feet came from Craftware. Did not change any orientation since auto generated supports from Slic3r and Craftware work very well.
Settings
Material Brand
cheap garbage
Material Type
ABS 3mm
Layer Height
0.2
mm
Print Speed
40.0
mm/s
Extrusion Temperature
255.0
°C
Infill %
20.0
%
Supports
Yes
Comments