![View Klaus Daume's profile Klaus Daume's avatar](https://assets.pinshape.com/default/avatar-small.jpg)
Megadrive Controller2USB Adapter *Source included* - 3D Printed by Klaus Daume
![Megadrive Controller2USB Adapter *Source included* 3D Print 14121 Megadrive Controller2USB Adapter *Source included* 3D Print 14121](http://assets.pinshape.com/uploads/print_image/file/14121/container_IMG_20161014_133744.jpg)
![Megadrive Controller2USB Adapter *Source included* 3D Print 14118 Megadrive Controller2USB Adapter *Source included* 3D Print 14118](http://assets.pinshape.com/uploads/print_image/file/14118/container_print.jpg)
![Megadrive Controller2USB Adapter *Source included* 3D Print 14119 Megadrive Controller2USB Adapter *Source included* 3D Print 14119](http://assets.pinshape.com/uploads/print_image/file/14119/container_IMG_20161015_180635.jpg)
![Megadrive Controller2USB Adapter *Source included* 3D Print 14120 Megadrive Controller2USB Adapter *Source included* 3D Print 14120](http://assets.pinshape.com/uploads/print_image/file/14120/container_IMG_20161014_132853.jpg)
![Megadrive Controller2USB Adapter *Source included* 3D Print 14122 Megadrive Controller2USB Adapter *Source included* 3D Print 14122](http://assets.pinshape.com/uploads/print_image/file/14122/container_IMG_20161014_132746.jpg)
1001
Printer Used
My Rating
My Thoughts
Due to the simple shape it prints nicely. Support is not really necessary but helps.
Settings
Print Time
4
hr(s)
30
min(s)
Material Brand
Madesolid
Material Type
PET+ Marine
Layer Height
0.2
mm
Print Speed
40.0
mm/s
Extrusion Temperature
205.0
°C
Infill %
10.0
%
Supports
Yes
Comments