![View Klaus Daume's profile Klaus Daume's avatar](https://assets.pinshape.com/default/avatar-small.jpg)
AFV 6x6 A.M.V.P. Mk.III(Chinchilla) - 3D Printed by Klaus Daume
![AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15016 AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15016](http://assets.pinshape.com/uploads/print_image/file/15016/container_IMG_20161111_132541.jpg)
![AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15012 AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15012](http://assets.pinshape.com/uploads/print_image/file/15012/container_IMG_20161111_132427.jpg)
![AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15013 AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15013](http://assets.pinshape.com/uploads/print_image/file/15013/container_IMG_20161111_132441.jpg)
![AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15014 AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15014](http://assets.pinshape.com/uploads/print_image/file/15014/container_IMG_20161111_132502.jpg)
![AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15015 AFV 6x6 A.M.V.P. Mk.III(Chinchilla) 3D Print 15015](http://assets.pinshape.com/uploads/print_image/file/15015/container_IMG_20161111_132526.jpg)
1278
Printer Used
My Rating
My Thoughts
The lower hull were made with noname ABS filament. Upper Hull, axles and gun were made with FormFutura PET. Turrent with Madesolid PET+ and Tires came from Ultimaker softPLA. All in all an awesome fit in place print and model. My Son will love it! Thank you very much!
Settings
Print Time
16
hr(s)
0
min(s)
Material Brand
differnet see below
Material Type
differnet see below
Layer Height
0.2
mm
Print Speed
40.0
mm/s
Extrusion Temperature
differnet see below
°C
Infill %
20.0
%
Supports
Yes
Comments