SilencerCo Maxim 9 (Long and Short Configuration) - 25% OFF

IF PURCHASING IS STILL DISABLED, PLEASE HEAD OVER TO CULTS 3D TO DOWNLOAD

SilencerCo is a manufacturer of firearm suppressors founded in 2008. The Maxim 9 is SilencerCo’s first fully functioning firearm. The Maxim 9 is the world’s first integrally suppressed 9mm handgun that represents one of the greatest strides made in both pistol and suppressor technology. It is holsterable and hearing safe with all types of 9mm ammunition. (SilencerCo website)

In games the Maxim 9 is featured in Gun Club VR by Nextgen Reality Pty. Ltd. It only appears to be featured in one movie to date: 6 Underground (2019) (Internet Movie Firearms Database website).

This is a non-working prop for display or cosplay purposes; there are no moving parts or insignia. It is not an exact replica, but disappointed with all poor quality models I found, my aim was to get it as close to accurate as I could and include the morse code grip that others miss. 

I'm confident that this is the most detailed printable version of the Maxim 9 available and it feels amazing in the hand. I also have a detailed model of the latest SilencerCo development, the Maxim 9 Non-NFA available here: https://pinshape.com/items/63424-3d-printed-silencerco-maxim-9-non-nfa

The Maxim 9 has a long and short configuration. This model is not modular in use, but has printable parts that will allow you to decide between long and short configurations at the build stage (see the exploded image). 

I split the model into printable parts along natural seams so that it can 'click' together without filling, repairs or special post-processing. All parts are orientated for the best print. Unfortunately some parts will need supports to print successfully in these orientations. Some tips for printing and building follow:

Tips

I print all my models with a 0.4mm nozzle and 4x shells (1.6mm) for strength and to provide a thick enough surface for sanding. Print all parts at 0.12mm layer height to maintain details and fitting tolerances. Some parts will need supports. Use your judgement on where these need to be, but note that the frame prints upside down and will need supports for the main part, but that morse code grip texture will print perfectly without supports. Personally, I prefer to use a raft whenever using so many on-bed supports. Your mileage may vary.

Infill can be kept to a minimum, however, I prefer my handgun models to have extra weight so I print at 60% infill. The Maxim 9 is relatively long and in reality the front end barrel and silencer comprise of baffles and air high infill at the front will unbalance it. My advice is to print the frame and slide at 60%, the barrel at 25% and the silencer baffles and front cap at 10%.

Repeatable parts are provided once and their file reference will indicate the number of prints required e.g. 4-07 Pin [1-8].stl needs to be printed eight times.

All parts should be obvious in the way they fit together as there's only one way, that is with the exception of the magazine; make sure you get it the right way around. Sand all parts and check the fit before gluing together. Think carefully about the order you're building the model in and if parts need to remain unglued to help with painting and finishing. I recommend Super Glue or any other Cyanoacrylate (CA) based equivalent. One with a 10sec or less setting time is especially useful. 

Registration pins (used for silencer parts) are sized correctly, however, from experience of other models I found that my printer's bridging affected tolerances, which meant that pins were too long. If you find that parts don’t fit together properly, an effective method is to fix one end of the pin and then snip it shorter to suit the second part - sharp wire cutters are ideal.

Disclaimer

The model .STL parts and these instructions are provided as is. This is a fan-created prop not affiliated with SilencerCo in any way.

The model has no moving parts. It is designed for display purposes. It can be used for cosplay if suitable precautions are taken such as fitting an orange safety cap to the barrel (model provided). I do not endorse the use of this model as a representation of, or conversion into, a working firearm. 

Please observe all local legislation regarding replica (or lookalike) firearms, especially when in public spaces. Remember, a law enforcement officer will not distinguish this from a real weapon and I cannot be held accountable for anything that happens to you!