Best Friend

Horizontal thumbnail Best Friend 3D Print 23209

Horizontal thumbnail Best Friend 3D Print 23210

Horizontal thumbnail Best Friend 3D Print 23211

Shape thumbnail Best Friend 3D Printing 21599

Prints (4)

els_meulendijks

almost 8 years ago

Ultimaker Original

Like 11

0
aad_koene

almost 9 years ago

RepRap Prusa i3

Like 18

2
Matthew Dingfield

over 9 years ago

RepRap Prusa i3

Like 50

3
jarra35

almost 9 years ago

RepRap Prusa i3

Like 39

0
huisje_palm

over 8 years ago

RepRap Prusa i3

Like 16

0
Drag & Drop A Photo or
Click To Browse

Description

This model was made for my stepdaughter who love horses..

the example was printed with a layer of 0.2mm and tested in Kisslicer and Slic3er .

Really easy to print, truly Optimized for FDM printers - No support Needed

original Size: x- 136mm y - 136mm z - 70mm

Note :

All my models are given for free to the community (fully open source for private or commercial usage, don't forget the credit), but If you like my work, please award it with a small donation (click here for a paypal donation ). I'll be very grateful to help me to buy all the coffee that i drink for the long periods that I pass in front of my screen to create these models.

Design Files

File Size

bestfriend.stl

10 MB

Comments

A.zhang:

Very nice, and really neat how you made it support free!

Reply10 years ago

fantasygraph:

i hate so much support.. Aside if you use a dissolvable filament for support, they always ruin your print when you try to remove them (more or less... mmmhhh ok...a lot more than less :) ). So i chose to 'conceptualize' all my models to be 'support free' to the best i can.. it's a lot of work to think to put what and where to reach that goal. I would say that it's my trademark . Thank you for your comment

Reply10 years ago

acgrimwood52:

incredable

Reply4 years ago

r1ck111:

Hi. newbie to 3cd printing here, can any tell me about the best settings to have my printer on, this has come out very stringy, I'm using PLA + Silk, unfortunately I have no heated bed, but will purchase one, my printer is an Easy ThreeD X2.

Reply3 years ago

fantasygraph:

sorry , i can't help you. i never use PLA

Reply3 years ago

steinmannro:

Hi r1ck111 mit welchem Slicer Arbeitest Du ???

Reply3 years ago

steinmannro:

sollte es Cura sein probier den Rückzugswert auf 25 zu stellen mit direct extruder passt das

Reply3 years ago

steinmannro:

solltest Du kein Direct extruder haben musst Du am besten dein Hotend messen und sehen das er max auf 16 stellen kannst mot Rückzug des Filaments