Best Friend - 3D Printed by Matthew Dingfield

Horizontal thumbnail Best Friend 3D Print 987

Like 50

1380

Printer Used

RepRap Prusa i3

My Rating

Settings

Material Brand

Hatchbox

Material Type

PLA

Layer Height

0.2 mm

Print Speed

60.0 mm/s

Extrusion Temperature

215.0 °C

Infill %

50.0 %

Supports

Yes

Comments

Karen:

Wow nice to see how the neck turned out! You ended up using supports for this?

Reply10 years ago

fantasygraph:

yep, a nice print ,but this model is really 'support not needed' (my humble solidoodle 2 can print it .. so i thought than any printers can do it ) so i don't understand why you use support... perhaps the throat was a bit difficult for your printer ? and 50% infill is WAY overkill.. (10-15% is largely suffisant ). it's a waste of material.. :)

Reply10 years ago

Matthew Dingfield:

I printed this for my 7 yo daughter. She's hard on things so I printed with high infill. Support was set to auto using Cura which I think I had set for angles under 45 degrees and I didn't try any other settings. The first shot came out very well.

Reply10 years ago

Best Friend - 3D Printed by Matthew Dingfield

Material Brand

Material Type

Layer Height

Print Speed

Extrusion Temperature

Infill %

Supports

Comments

Your browser is out-of-date!