Element RC Enduro Servo Plate

This is a servo plate i designed to be stronger than the stock plate,

This plate will work with a stock set up (with the servo mounted underneath) or with my complete Chassis Lowering kit (coming soon) with the servo mounted on top of the plate,

The chassis mounting screw holes are part of the plate (will need threading and i strongly recommend using stainless hardware to do this as it doesn't 'grab' the print material and ruin the thread hole), However you will need to drill your own servo mounting holes ( use a sharp drill bit and a very very slow drill speed)

There is an arrow on the plate for orientation, This faces down (towards axle) and to the front of the truck.