Marble Run Building Brick - Set BASIC

Prints (1)

Description

Discover the "Starter Kit of Marble Run Building Bricks

We are working on LEGO®-compatible Marble Run Building Bricks for up to 12 mm balls.  Because sometimes it helps to have a few specialty parts for  curves, gentle slopes and smooth transitions.

Our STL-files are a little bit larger, because you get high quality and high resolution STL-files to get a perfect printing result. Also, we regard the tolerances of the 3d printing process in our 3D STL-models. So please print the models with the recommended print settings.

The INITIAL LAYER HEIGHT is very important! Check your printer nozzle calibration!

Slicer: Cura Material: PLA, Nozzle: 0.4mm, Layer: 0.15mm, Initial Layer: 0.175mm, Infill: 15% WallThickness: 0.8mm, TopThickness: 0.6mm  --> 4 layers, BottomThickness: 0.6mm  --> 4 layers Fill Gaps Between Walls: Nowhere, Filter Out Tiny Gaps: Yes, Optimize Wall Print Order: Yes

Some Bricks, like looping need: use adaptive Layer: Yes, layer variation: 0.5 --> layer 0.05 to 0.15mm

Design Files

File Size

marble_brick_06x06_twister.STL
2.82 MB
marble_brick_04x04_twister.STL
2.05 MB
marble_brick_04x04_split.STL
3.1 MB
marble_brick_04x04_funnel.STL
2.3 MB
marble_brick_04x04_curve_sloped.STL
1.48 MB
marble_brick_08x08_twister.STL
4.8 MB
marble_brick_04x04_curve.STL
2.15 MB
marble_brick_04x04_cross.STL
4.1 MB
marble_brick_12x12_twister.STL
9.73 MB
marble_brick_02x02_tunnel.STL
694 KB
marble_brick_02x04_looping.STL
9.28 MB
marble_brick_02x04_track.STL
434 KB
marble_brick_02x04_track_sloped.STL
435 KB
marble_brick_02x16_track_flex.STL
3.1 MB
marble_brick_02x02_curve.STL
1.06 MB
marble_brick_02x02_curve_sloped.STL
605 KB
marble_brick_02x02_startend.STL
603 KB
marble_brick_02x02_track.STL
158 KB
marble_brick_02x02_track_sloped.STL
159 KB
marble_brick_02x02_cross.STL
179 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×