Bolt on DW611 Dust Collector Upper with built in deflector

Fully compatible with my Low Leverage DW611 Spindle mount for Shapeoko 2

Now includes Brush plate!

Requires:

• 1 - Vacuum hose adapter & 4 - M5 bolts with nuts
• 2 - pan head wood screws about 25mm long (to replace factory screws that hold spindle stop button in place)
• 8 - 8mmx3mm super magnets

Best printed at .25mm or less layer height.   ABS or PLA compatible.  

Support should be enabled for the recessed bolt holes.