DIY Overwatch real size Mei Endothermic Blaster HQ printable kit

Prints (-1)

Description

Hey Folks!

Here I am again to show my latest creation, from the famous videogame Overwatch, High Quality and fully detailed real-size Mei´s Endothermic Blaster ready to be printed, assembled and painted.

About printing settings: - PLA its enough but feel free to use other kind of material. I prefer pla because I get a finer result thanks to good retractions and flow control. - Supports: Not needed. - infill: 20% - layer height: 0,1 its recommended.

All 51 pieces match eachothers, It will not be necessary to cut or sand the pieces as long as you have your printer properly calibrated.

The pieces are designed to be printed with medium format printers 15x15  hotbed area its more than enough for the longest pieces, so if you have an smaller one you will need to make some cuts on a couple of pieces ussing your slicer, nothing hard btw.

Use any kind of super glue or gorilla glue to join all pieces once they are assembled.

Also, the Blaster its holowed, ready to add led lightning and bateries to give extracool effect!

I hope you enjoy printing as much as I did by designing it.

Greetings, makers!

Design Files

File Size

grey-6.stl
414 KB
x2pip5.stl
541 KB
RackMultipart20180822-7480-3qpij5.zip/6.png
336 KB
RackMultipart20180822-7480-3qpij5.zip/5.png
1.06 MB
RackMultipart20180822-7480-3qpij5.zip/4.png
795 KB
RackMultipart20180822-7480-3qpij5.zip/3.png
1.03 MB
RackMultipart20180822-7480-3qpij5.zip/2.png
916 KB
RackMultipart20180822-7480-3qpij5.zip/1.png
1010 KB
RackMultipart20180822-7480-3qpij5.zip/20180822_200525[2167].jpg
4.59 MB
cb-4.stl
23.5 KB
blue-4.stl
606 KB
blue-1.stl
458 KB
cb-1.stl
72.5 KB
cb-3.stl
930 KB
blue-2.stl
258 KB
blue-left.stl
683 KB
cb-6.stl
407 KB
cb-7.stl
421 KB
clip1.stl
954 KB
clip2.stl
470 KB
grey-2.stl
562 KB
grey-3.stl
69 KB
grey-5.stl
143 KB
grey-7.stl
728 KB
red-2.stl
619 KB
silver-1.stl
535 KB
silver-5.stl
490 KB
transparent-3.stl
85.9 KB
trigger.stl
629 KB
w-2.stl
57.2 KB
w-4.stl
1.02 MB
1.stl
492 KB
pip6.trigger.stl
75.7 KB
w-1.stl
1.1 MB
w-3.stl
48.8 KB
w-5.stl
3.11 MB
w-6.stl
1.41 MB
x2pip4.stl
442 KB
red-1.stl
588 KB
X2transparent-1.stl
77.2 KB
2.stl
1.03 MB
blue-3.stl
1.04 MB
blue-right.stl
726 KB
cb-5.stl
21 KB
cb2.stl
123 KB
grey-1.stl
984 KB
grey-4.stl
137 KB
pip1.stl
84.7 KB
pip2.stl
402 KB
pip3.stl
78 KB
red-3.stl
619 KB
silver-2.stl
535 KB
silver-3.stl
411 KB
silver-4.stl
620 KB
transparent-2.stl
501 KB
transparent-4.stl
12.1 KB
transparent-5.stl
6.72 KB
transparent-6.stl
1.8 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×