Designed by
AlieneilA
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary Dice Tower made for @TheGodDamnDM and @AlmostHeroicDnD. For the production model I cut it up into 16 pieces and printed at 175% scale. Scuffed up the connecting pieces with a dremmel, glued together with E6000, used spot putty to fill the seams, sanded down, spray painted with a primer based paint in Black and then purple, sponged some black texturing on the outside of the cowl, then hand painted the face, eyes and letters in the base. Finishing it all off with a urethane spray gloss. Check out the master DM himself and listen in to the Almost Heroic D&D podcast.https://twitter.com/TheGodDamnDMhttps://twitter.com/AlmostHeroicDnD
Design Files
File Size
014.stl
35.7 MB
TheGodDamnDMDiceTower.stl
55.3 MB
007.stl
31.7 MB
006.stl
26.1 MB
016.stl
65 MB
008.stl
31.9 MB
013.stl
36 MB
015.stl
64.3 MB
010.stl
25 MB
011.stl
22.7 MB
004.stl
2.27 MB
005.stl
2.24 MB
002.stl
1.59 MB
009.stl
24.7 MB
012.stl
22.8 MB
003.stl
1.61 MB
001.stl
20.1 MB
Comments