Designed by
3D Flight
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
DIY RC plane launcher using 3D printed parts and some PVC, rubber bands and zip ties. Great for if you have a belly lander RC plane that you aren't comfortable launching by hand. Give it a try
If you are interested in this take a look at our website www.3d-flight.com
Click here for a video on the build and test
Print Settings:
Nozzle: .4mm nozzel
Layer Height: .250mm
Outer Shells: 1
Top/Bottom Layers: 3
Infill: 15%
Temp:220 C
Design Files
File Size
PlaneShot - ReleaseBungeeHook.STL
78.2 KB
PlaneShot - ReleaseHookPivot.STL
70.4 KB
PlaneShot - ReleasePedalLock.STL
86.5 KB
PlaneShot - ReleasePedal.STL
62.2 KB
PlaneShot - ReleasePedalPivot.STL
113 KB
PlaneShot - PivotAnchorL.STL
96.9 KB
PlaneShot - PivotAnchorR.STL
99.9 KB
PlaneShot - Instruction Manual.pdf
380 KB
PlaneShot - Frame90ElbowR.STL
124 KB
PlaneShot - FrameCrossbarAnchorL.STL
119 KB
PlaneShot - FrameCrossbarAnchorR.STL
119 KB
PlaneShot - FrameTripleElbowL.STL
129 KB
PlaneShot - FrameTripleElbowR.STL
130 KB
Detent.STL
18.1 KB
PlaneHook.STL
13.4 KB
Planeshot - BungeeEyeletLocked.STL
261 KB
PlaneShot - BungeeEyeletRemovable.STL
264 KB
PlaneShot - Frame110Elbow.STL
82.9 KB
PlaneShot - Frame70ElbowL.STL
107 KB
PlaneShot - Frame70ElbowR.STL
105 KB
PlaneShot - Frame90ElbowL.STL
122 KB
Comments