Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
This is a 5.25" to 1x 3.5" and 1x 2.5" drive bay adapter. It is pictured with my previously designed 3.5" to 2x 2.5" bay adapter mounted in the 3.5" slot. Printed in PLA, with 20% infill, weighs only 83 grams. This model can accommodate both 7mm and 9mm drives (7mm pictured)(2.5"). It can also accommodate a 3.5" drive up to 1" in thickness. The mounting screws and hex nuts are standard M3, but any screw should be fine as long as the mounting hex nut has an outer diameter of 6mm or slightly less. While the mounting screw and nut are M3, it is important to note that 2.5" drives utilize M3 screws for mounting. 3.5" drives utilize #6-32 UNC screws. The screws and nuts I used were "https://www.amazon.com/gp/product/B00032Q1J4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1" and "https://www.amazon.com/gp/product/B000NBIH92/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1" respectively. Anything with similar dimensions would work just as well. I am in no way trying to promote or advertise these products, but they are the only ones I can guarantee work.
Comments