Portable Chess and Checker set

Prints (0)

Description

Summary This is the portable chess and checker game box that I designed. The box has a little lip to prevent the game board from sliding out. Once the board slides into place it will be held in place by the small lip. To remove the board you will need to lift the board slightly and then slide it out. To create the board, you will want to print both the board and board pieces (in different colors). Once they are printed you will want to put a board piece in each of the indentations on the board. You can use a small amount of glue to hold the pieces in place. Don’t use too much glue because then it will squirt out. Post-Printing Build Board To create the board, you will want to print both the board and board pieces (in different colors). Once they are printed you will want to put a board piece in each of the indentations on the board. You can use a small amount of glue to hold the pieces in place. Don’t use too much glue because then it will squirt out. The board pieces are supposed to be tight. If any of them are a little too big simply take a knife and scarp it down a bit.

Design Files

File Size

Checkers.stl
481 KB
Chess_Pieces.stl
6.79 MB
Rook.stl
25.5 KB
board.stl
125 KB
King.stl
79.3 KB
box.stl
23.6 KB
board_pieces.stl
81.8 KB
Bishop.stl
124 KB
Knight.stl
13.9 KB
Queen.stl
75.1 KB
Pawn.stl
119 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×