3Dprinted Lunar Phase Clock

Summary https://www.youtube.com/watch?v=8Un9RubtGH0 3D printed Lunar Phase Clock, designed by G4lile0 2016 Since there isn't a SuperMoon everyday, make one for your bedside table!! If you don't know what to print with your 3D printer, here you have an easy project. Build a 3D printed Lunar Phase Clock for your desk. Features: (check the video)

Open Tools (Ubuntu / FreeCAD / Arduino) Open Source / Hardware Cheap HW (Arduino, cheap LCD..) Only 79 grams of filament. Precise Lunar Phase Simulation Detailed 3D printed Lunar model by Dexter_New_Materials (http://www.thingiverse.com/thing:1014620) Alarm Wake-light alarm mode Date Thermometer Hygrometer Lamp mode Moon FX modes (Relax, Party... ) Bright control Adjustable tilt

Parts List:

Arduino compatible Nano (Atmel ATmega328) 0,96'' OLED 128x64 with SSD1306 chip APA102C led strip (18 leds) Tiny RTC (DS1307 real time clock + 24C32 EEPROM) DTH11 Buzzer 3 Push Buttons

Source available on GitHub: https://github.com/G4lile0/Arduino_3dprinted_Lunar_Phase_Clock Video Created under Ubuntu with OpenShot video Editor. Music : Sport Action Reloj con fase Lunar impreso en 3D diseñado por G4lile0 Como no todos los días hay una SuperLuna ¡¡fabrícate una para la mesilla de noche!! Si no sabes que imprimir con tu impresora en 3d, aquí tienes un reloj con fase lunar para tu mesa.

Creado solo con herramientas libres (Ubuntu / Freecad / Arduino) Open Source / Hardware Electrónica económica (Arduino, LCD) Tan solo 79 gramos de filamento Precisa simulacion de la fase lunar Modelo detallado de la luna by Dexter_New_Materials (http://www.thingiverse.com/thing:1014620) Reloj analogico y digital Alarma con simulación de amananecer Alarma Fecha Termometro Monitor de Humedad Lampara Modos Demo (Disco /Relax...) Control de brillo Inclinación regulable

Componentes:

Arduino compatible Nano (Atmel ATmega328) 0,96'' OLED 128x64 with SSD1306 chip APA102C led strip (18 leds) Tiny RTC (DS1307 real time clock + 24C32 EEPROM) DTH11 Buzzer 3 botones.

Fuentes disponibles en GitHub: https://github.com/G4lile0/Arduino_3dprinted_Lunar_Phase_Clock Vídeo creado bajo Ubuntu con OpenShot video Editor. Musica : Sport Action Print Settings Printer: Prusa Rafts: No Supports: No Resolution: 0.2mm Infill: bq prusa i3 hephestos Notes: Layer Height = 0.2 mm Wall Thickness = 1 mm Top Thickness = 1 mm Bottom Thickness = 0.2 mm For the Moon Infill Density = 0% , for the rest of the parts infill Density = 100% Check the screen-shoots of Cura