The 3D Printed Marble Machine by Maher Soft

Prints (0)

Description

Summary This is a 3D Printed marble machine on our latest Indie 3D Printer that takes marbles through crazy loops and turns. A marble machine designed in ONSHAPE is completely based on rigid bodies, rigid body joints and mechanics. The assembly has approximately 34 parts printed in ABS , and it can be powered by using DC motors or batteries. It uses a 1.5 cm diameter steel marble, which starts at the bottom, and goes to the top, and then returns to the bottom, making this trip about 8640 times in 24 hours. Marble Machine Video - https://www.youtube.com/watch?v=PAynwHogPto&feature=youtu.be Indie Teaser - http://bit.ly/2f0MNnd Sign up now to buy Indie on Indiegogo at $549 - http://www.mahersoft.com/indie (Only for Early Bird Backers) The new 3D printed marble machine we have all been waiting for! Follow us on Facebook - www.facebook.com/mahersoft3d Twitter - www.twitter.com/mahersoft3d Instagram - www.instagram.com/mahersoft3d Website - www.mahersoft.com Contact - [email protected]/* */ Made one yourself? Feel free to upload your photos Inspiraion: Daniel Parker Print Settings Printer: Indie: The Desktop 3D Printer Rafts: Doesn't Matter Supports: No Resolution: 200 micron Infill: 15-20% Notes: We have attached the instruction document along with spare list and drawing for rod. Please refer the documentation. NO SUPPORTS NEEDED! Some parts might not fit on a small print bed, we recommend you to cut the file in 2 parts and glue later. 15- 25% Infill worked best for me. 0.2 mm layer height. Try out the best settings for yourself. Steel ball bearings Go3d Post-Printing

Working of 3D Printed Marble Machine Video

The 3D Printed Marble Machine on Indie 3D Printer

Printed on Indie 3D Printer

All parts 3D Printed of Marble Machine How I Designed This Designing At first glance, it may look relatively simple, but a lot of planning and tweaking had to go into the design process keeping in mind that all parts have to be 3D Printed and support free to avoid any kind of post processing. It took us approximately 2-3 weeks to design the assembly on Onshape and a series of iterations to make a working model of the marble machine. The whole assembly consists of 34 3D Printed parts, nuts, screws, and a DC motor to provide a rotary mechanism. The marble starts at the bottom, and goes to the top, and then returns to the bottom, making this trip about 8640 times in 24 hours. Each step lifts the marble back up to the top of the slide in a synchronous manner. Here, the entire process starts all over again and continues so long as you keep turning the CAM shaft. Custom Section

Design Files

File Size

Cam.stl
1.19 MB
Stair-7.stl
809 KB
Stair-10.stl
162 KB
Marble_Guide.stl
265 KB
motor_cap.stl
920 KB
Left_Plate.stl
689 KB
Right_plate2.stl
327 KB
Front__Back_cover-1.stl
130 KB
outside_plate2.stl
307 KB
BOTTOM_PART.stl
260 KB
coupling.stl
172 KB
Stair-4.stl
222 KB
6_MM_SHAFT_Design.pdf
47.6 KB
Spare_List_.docx
13.5 KB
Instructions.docx
34.8 KB
motor_holding_block.stl
3.13 MB
Stairs_Support_Back1.stl
242 KB
Stairs_Support_Back2.stl
315 KB
STRAIGHT_STAND.stl
203 KB
Stairs_Support_Front.stl
103 KB
Stair-9.stl
172 KB
Right_plate1.stl
682 KB
outside_plate1.stl
761 KB
Stair-8.stl
179 KB
Stair-3.stl
249 KB
Stair-5.stl
203 KB
BASE_Plate.stl
784 KB
Stair-1.stl
599 KB
Stair-6.stl
191 KB
Stair-2.stl
268 KB
Front__Back_cover-2.stl
130 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×