Tenkeyless (TKL) Keyboard Tray


Summary I made this keyboard tray to complement my HID Relay USB Keyboard->Bluetooth Keyboard mod. It was designed to fit my TeamWolf Zhuque+, but should accomodate any keyboard up to 350mm wide by 117mm deep with the cable centered from the back. Probably nobody else needs such a niche item, but I thought I'd share anyway. If you're more interested in the USB->Bluetooth adapter, check out my videos on how it works and build instructions here: https://www.youtube.com/playlist?list=PLVfmdw6Y3COp4Via7KergjVs8i194ffJS Print Settings Printer Brand: Deezmaker Printer: Bukito Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 10-20 Notes: If you want to print the split version, print the tab and slot test files first to test the separation tolerance and tweak your slicer/print settings if needed. The split parts are designed to fit on my Bukito's 140x150mm print bed. You need support under the tabs. I printed with only 10% infill, 3 perimeters, and 3 layers top/bottom. You'll probably want a denser infill and/or more top layers to avoid some holes that I got around the inside walls where the keyboard sits. The keyboard will be covering it up, but if that still bugs you adjust settings accordingly.

Design Files

File Size

36.3 KB
28 KB
5.75 KB
59.5 KB
28.4 KB
35.6 KB
39 KB
35.2 KB
39.2 KB
6.14 KB


Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now