Power Cord / Cable Strain Relief

SummaryI feared yanking the power cord hard enough to pull the wired from the power supply. Mounts in the the 2020 extrusion channel nicely with a M3x10 screw and a drop-in M3 T-nut. Minor update. Magenta (thought it was more red) print was PETG with 0.3mm layers.InstructionsI printed with .25mm layer height using PLA and .3mm layer height using PETG. Needed:

M3x10 screw M3 drop-in t-nut if you are bolting it to 20x20 extrusion. a power cord you don't want yanked out