Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
An Octagonal shaped bunker used by the defenders of the Imperium. Designed to fit with the Aegis Defence Line. Assembly Required.
Please choose the files associated with your printer type below. Or whatever works for you. Assembly is, I hope, fairly obvious.
I have now added a Baseplate (two halves, two files) to make assembly (i.e. lining up the walls) easier.
Print List (FDM): 1x Door Hatch, 1x Entrance Wall (FDM), 3x Wall x2 (FDM), 2x Roof (Half).
OR 1x Entrance Roof (FDM), 7x Wall Roof (FDM),
Print List (Resin): 1x Door Hatch, 1x Entrance Roof (Resin), 7x Wall Roof (Resin).
I recommend printing the Door + Hatch on a slow speed setting for accuracy. The others are fine on normal speed.
Once assembled, I like to leave the roof unglued so as to view any models inside the bunker. The Roof Hatch is optional, and can be replaced with weapon emplacements from the Aegis Defence Line range (e.g. A Hydra Autocannon emplacement).
EDIT: I've made some changes to a couple of the files due to errors or updates, so please download again if you haven't done so as of 07/11/2020.
Comments