Designed by
Pierrimus









Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
This allows you to attach an ATX PSU to the side of the Rework frame. This works only with about 90 mm of the rear 8mm rod sticking out from the frame. You'll need two 1/4" screws and nuts to mount the one leg to the frame. Then there are four screws to assemble the parts. The file ATX PSU Holder is a combined part, I broke it up because I was having problems with it printing in ABS without delamination.
Design Files
File Size
ATX_PSU_Mount_Main_Holder.stl
67 KB
ATX_PSU_Mount_Body_Pin.stl
23.8 KB
ATX_PSU_Holder.stl
36.5 KB
ATX_PSU_Mount_Rear_8mm_Shaft.stl
19.1 KB
ATX_PSU_Mount_Leg_Peg.stl
10.4 KB
Comments