Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
-
Drag & Drop A Photo or
Click To Browse
Description
Description: --------------------
A minimal design to a 2018 iPhone 6 SE case but with the added eyelets for mini-carabiners or other lanyard system.
4 mm of infill around three sides of the phone provide a reasonable amount of impact protection and the bottom provides access for a lightning cable. Hollow cavities allow for minimal sound attenuation.
Note: initial prints, displayed, did not include headphone access.
Printing: --------------------
This print was accomplished with .5mm nozzle and .2mm layer height using 1.75mm TPU. I would recommend a smaller nozzle and layer height to increase adhesion for the top-most layers.
Supports: --------------------
Recommend minimizing supports to only the mute slider and the sound/lightning cavities.
Comments
This is a great design, combining both functionality and minimalism with added durability! The extra eyelets for lanyard compatibility are a nice touch, offering flexibility for different uses. At ZIS Consultants, we understand the importance of customizing solutions to meet specific needs, just as you've done with this case. Whether it's business processes or tech solutions, we help clients achieve practical, user-friendly results. Thanks for sharing the detailed printing recommendations—these insights are always helpful for the 3D printing community!