Designed by
uk4dshouse
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
A small 50 mm x 50 mm x 50 mm cube made up of 5 layers that are stacked on top of each other in a specific order and orientation.
Each layer is made up of a number of holes and pegs that interlock with the next layer.
Designed using BlocksCAD
Print settings: Layer Height 0.15 mm, Shell 1 mm & 3 wall, Infill 25%, Tri Hexagon, Build Plate Adhesion Brim
Approximate Print times.
100% takes 7 Hr 34 Min , Weight 80 g and 26.81 m of filament.
75% takes 4 Hr, Weight 39 g Weight 13.21 m of filament.
50% takes 1 Hr 38 Min , Weight 15 g & 4.51 m of filament.
Holes may require filing subject to tolerances and pegs can be fragile if printed <50%
Design Files
File Size
stack_cube.obj
11.6 KB
Comments