Trail Finder 2 Hilux Interior (Mojave/Marlin)

This is a bolt in ready 1 piece interior for the Toyota HiLux (Mojave/Marlin) hard bodies from RC4WD. Should work with the Tamyia HiLux body as well and will be test fit in the very near future. (a body is on order)

This interior utilizes the factory dash that comes with the Mojave/Marlin bodies as well as all the factory mounting boss's on the body. Requires no modification to any existing parts. Holes behind the seat are for adding a seat belt to retain a driver and/or passenger. These holes are sized for M3 screws. Two locations have been added for shifters to be put in, you are on your own for making a shifter, (my plan is to use a piece of solid core wire glued in and not sure for the shift knob yet)

Chassis clearance below the interior is minimal however enough for relatively low profile electronics. (photos of the interior installed and mounted to a TF2 chassis coming soon) I was able to mount the AXE ESC (size can be found on the Hobbywing website) on the TF2 chassis plates and still fit this interior. 

The hole in the center of the firewall is to be able to pass wiring into the cab for any reason you may want power in the interior area, (lights, active steering wheel, ect.)

This part is not a challenging print and only requires support from the build platform.

Enjoy and be sure to post photos of your finished products.