Phone Stand for Phones with Bulky Covers

Here is a phone stand that will allow you to stand your phone with the charger cord plugged in.

It is designed for phones with bulky covers and will accept thicknesses of up to 20 mm. It will hold most phones with or without covers.

It has an opening in the rear to allow you to feed your charge cable through.

Can be printed without supports, brims, rafts.

Settings for printing

Layer height 0.2 mm

Infill 25% to 50%

Wall thickness 1.4 mm

PLA print temp 210 degrees

Hot bed temp 60 degrees