Nr 9 Lamp

Simple ambient LED lamp that changes color

*re-shaped an old model on request.

The light source is an Arduino Nano and 4 neo pixels run on a phone charger. You can see it on one of the pictures.

The Arduino runs a slightly modified sketch from AdaFruit that shifts slowly between colors.

AdaFruit has made a library that makes this very simple (https://learn.adafruit.com/adafruit-neopixel-uberguide/arduino-library-use).

The sketch, library and schematic I used can be downloaded at :https://www.thingiverse.com/thing:3263294 or https://www.myminifactory.com/object/3d-print-nr-9-lamp-80616, due to the fact I can not upload zip file etc here on Pinshape.. :-(

The main body is printed in the “spiral outer contour mode” or 2 bottom layers, 1 wall layer, 0% infill & 0 top layers.

The “back plate.stl” is printed as normal. I tested this model with a 0.4mm nozzle and a 0.2mm resolution.

Everything should fit together without the use of glue.

If you have any questions feel free to ask :-) Constructive comments are also welcome :-)