The Ark of the Covenant - Diorama-KIT

Summary The Ark of the Covenant Diorama-kit . Information about the Ark of the Covenant: https://en.wikipedia.org/wiki/Ark_of_the_Covenant How to make: Find a nice display box, or platform. (hobbystores online etc) Find some wooden sticks. (most supermarkets should have them otherwise try some street food stands) Find some plastic plant that can be used in the scene. (Dollar shops, decoration shops etc) Resize the model parts to fit your display box/platform and size the model to fit the wooden sticks. Print the models. Sand the models. Fit the model parts, the "Grail protection figures", "Wooden sticks", And "the Ark". Base coat the models. Put some simple cheap sculpting clay on your platform/display box. Model the clay how you want the scene to be (ground, pools of water, stones, and roads etc.) To give more stability to the figures while standing in the box you could press the figures into the clay (few millimeters should be ok) pull the figures out of the clay. While the clay is drying. Press your plastic plants into the scene. To make the reed shore I cut pairs of hairs from a brush and painted them. After the clay is dry, Paint the whole scene, drybrush weathering. Fill the water pools with "still water" or transparent glue. Let everything dry completely before putting on the top part of the display box. (otherwise the "still water" / glue will condensate on the inside of your display!) About the models: "Grail Protection figure" By wundel http://www.thingiverse.com/thing:111732 "Ark of the covenant (Indiana Jones inspired) Sliced to print" By MacGyver http://www.thingiverse.com/thing:118125 "Skull" http://www.thingiverse.com/thing:3400 By bothacker "The Ark of the Covenant Diorama-KIT" By Techtek http://www.thingiverse.com/thing:1755163 Thank you for watching, If you found this model useful please support and press the like and/or follow button. and don't forget to check out my other models and tutorials: . For example: Godzilla Diorama-KIT http://www.thingiverse.com/thing:1726345 Ancient "3d printing" Technique (Cylinder Seal VA-243) (Tutorial + Example) http://www.thingiverse.com/thing:1597817 Machinegun Mickey http://www.thingiverse.com/thing:1691460 How to make Human(ized) 3D Models? (Tutorial + Example) http://www.thingiverse.com/thing:1672403 Galactus - Bust http://www.thingiverse.com/thing:1704943 Custom Section (i'm getting a lot of downloads on my models, yet i don't see much people post back there printed results, if you want people continue to provide FREE models, please provide something back in return: Pictures, Comments, Tip money, a Thank you, a Follow or a Like...) Thanks for watching, If you enjoy this model please support and check out my other models and tutorials: . For example: Godzilla Diorama-KIT http://www.thingiverse.com/thing:1726345 Ancient "3d printing" Technique (Cylinder Seal VA-243) (Tutorial + Example) http://www.thingiverse.com/thing:1597817 Machinegun Mickey http://www.thingiverse.com/thing:1691460 How to make Human(ized) 3D Models? (Tutorial + Example) http://www.thingiverse.com/thing:1672403 LABEL SLIDER - (NES) http://www.thingiverse.com/thing:2159241