No Prints Yet
Be the first to upload a Print for this Design!
Summary For 8mm x 10mm x 10" LED 3-part light strips from IKEA (LEDBERG). Found them on clearance sale for $12 at my local store. Clips to attach the 2 side strips to the common Z-Braces mod. I.e. to mount to the vertical threaded rods. I made them very tight for the strongest hold, so I opted to print them in ABS for a little more flexibility than PLA. Assuming PLA would be too rigid to pop around the threaded rod. I used the https://www.thingiverse.com/thing:121247 to separate the 3 strips into flexible lengths. NOTE: I initially also used these along with this top strip mount http://www.thingiverse.com/thing:996974 , but I no longer recommend it as it gets in the way of your extruder movement at the top end of your printing, resulting in bad things, very bad things, man. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No