Summary A small model of the Fear Tech Pig Mascot from the movie Monsters Inc, originally created in Zbrush and exported as an STL. I originally tried to print it as a solid piece but was having problems with it so I ended up splitting it into two pieces and gluing it together. I've uploaded but versions so you can try whatever works best for you. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rafts: Yes Supports: Yes Resolution: .06mm Infill: 25% Post-Printing Just used some Krazy glue and epoxy to glue the two halves together, and a little sanding to try to hide the seam. After that was some hand painting with acrylics and a little coat of varnish over the top.