Star Wars MSE-6 Repair Droid Desk Caddy

Prints (0)

Description

Summary This is a replica of the MSE-6 repair droid from Star Wars, made into a desk caddy. it has storage both inside of it, and on the top of it, and has optional dividers you can print. I've got ahead and also uploaded version of the top / bottom pieces split in half because they wouldn't print as one piece on my printer. Print the following: x1 Top (Cut 1) x1 Top (Cut 2) x1 Bottom (Cut 1) x1 Bottom (Cut 2) x1 Side Panels x4 Wheel Print Settings Printer Brand: RepRap Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Post-Printing After printing, you'll need to glue Top (Cut 1) and Top (Cut2) together, and then glue the side panels to this (one on each side). Next, glue Bottom (Cut 1) and Bottom (Cut 2) together. Then, glue the wheels into the wheel wells for this bottom piece. Don't glue the top pieces to the bottom pieces! They slide together, and slide apart to reveal an inner storage area. After gluing, I did a lot of sanding, and used some bondo + sanding to fill the gaps between pieces and smooth it out.

Design Files

File Size

Bottom_-_One_Piece.STL
2.26 MB
Top_-_One_Piece.STL
1.35 MB
Bottom_Cut_2.stl
1.21 MB
Top_Cut_1.stl
655 KB
Wheel.STL
185 KB
Top_Cut_2.stl
798 KB
Side_Panels.STL
742 KB
Bottom_Cut_1.stl
1.15 MB
Divider.STL
684 Bytes

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×