![The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121916 The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121916](http://assets.pinshape.com/uploads/image/file/121916/container_the-hummingbird-hibiscus-w-supports-remix-3d-printing-121916.jpeg)
![The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121917 The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121917](http://assets.pinshape.com/uploads/image/file/121917/container_the-hummingbird-hibiscus-w-supports-remix-3d-printing-121917.jpeg)
![The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121918 The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121918](http://assets.pinshape.com/uploads/image/file/121918/container_the-hummingbird-hibiscus-w-supports-remix-3d-printing-121918.jpeg)
![The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121919 The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121919](http://assets.pinshape.com/uploads/image/file/121919/container_the-hummingbird-hibiscus-w-supports-remix-3d-printing-121919.jpeg)
![The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121920 The Hummingbird & Hibiscus w/Supports-REMIX 3D Print 121920](http://assets.pinshape.com/uploads/image/file/121920/container_the-hummingbird-hibiscus-w-supports-remix-3d-printing-121920.jpeg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary I really like The Hummingbird & Hibiscus by gustofusion. I wanted to make sure it was a printable item as even his description mentions needing special supports. I imported the model into SolidWorks and added supports where I thought they'd be needed and checked them in the preview section of Slic3r. I made two, one on each DaVinci... my older machine didn't handle it as well, but the fact I could print two at 65% scale and the beak still came out is pretty amazing. I will try to print a full scale or larger version this weekend and paint it next week. Thanks to gustofusion for this awesome model! EDIT: Missed the button on the challenge that lists on specific models, oh well... still a good print. UPDATE: 12/10/16 I added pictures of the 130% scale print. It is about 160mm tall and came out great! Now I just need to file, sand, prime and paint. Print Settings Printer: Da Vinci 1.0 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I ran these at 40mm/sec. Slower would probably be better.
Comments