Designed by
TheGoofy
![Replacement SD Card Case 3D Print 120306 Replacement SD Card Case 3D Print 120306](http://assets.pinshape.com/uploads/image/file/120306/container_replacement-sd-card-case-3d-printing-120306.jpg)
![Replacement SD Card Case 3D Print 120307 Replacement SD Card Case 3D Print 120307](http://assets.pinshape.com/uploads/image/file/120307/container_replacement-sd-card-case-3d-printing-120307.jpg)
![Replacement SD Card Case 3D Print 120308 Replacement SD Card Case 3D Print 120308](http://assets.pinshape.com/uploads/image/file/120308/container_replacement-sd-card-case-3d-printing-120308.jpg)
![Replacement SD Card Case 3D Print 120309 Replacement SD Card Case 3D Print 120309](http://assets.pinshape.com/uploads/image/file/120309/container_replacement-sd-card-case-3d-printing-120309.jpg)
![Replacement SD Card Case 3D Print 120310 Replacement SD Card Case 3D Print 120310](http://assets.pinshape.com/uploads/image/file/120310/container_replacement-sd-card-case-3d-printing-120310.jpg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary The case of my SD-card did break. Top and bottom separated, and the small bridges between electrical contacts did bend and finally broke off. I continued to still use the SD-card, but at some time it almost happened, that the small electronics-board of the SD-card was lost inside my laptop. So I decided to 3d-print a replacement case. The new case consist only of only one side, and the electronics-board is simply clipped into the designated slot. Fix it with a small piece of tape (or use super-glue) in order to prevent any unpleasant accident.
Design Files
File Size
SD_Card_Case.stl
92.4 KB
Comments