Designed by
juancgarcia
![Watch Links with 1.75mm Filament pins. 3D Print 114635 Watch Links with 1.75mm Filament pins. 3D Print 114635](http://assets.pinshape.com/uploads/image/file/114635/container_watch-links-with-1-75mm-filament-pins-3d-printing-114635.jpg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Summary Saw a friend with a neat metal link watch and was inspired to try my hand at a printed variant. I measured my watch strap to be ~24mm but pretty much free-handed the rest of it. I ultimately ended up with a link 24mm W x 14.5mm L x 5mm D, and 9.5mm axle to axle on center. FYI, this is just the link. Haven't designed a clasp/buckle yet. Included both the Rhino5 model and a ready-to-print STL Instructions Just print out as many links as you like, then line them up and push a length of filament through the holes. Trim the filament and repeat for as many link pairs as you have.
Design Files
File Size
watch_link.stl
314 KB
Comments