Travel & Home Soapbox

Prints (0)

Description

Summary I designed this soap box to work well inside the shower and in a suitcase for travel. The box has a perforated bottom with a slight incline to drain the water that will fall in the box when taking the soap in and out during the shower. The soap rests on a removable honey-comb grid elevated above the bottom. This allows the water to drain more easily and for the soap to dry quicker after the shower. I made the grid removable for easy cleaning and to let you print a solid piece if you want to store the soap for a longer time or other things entirely. The lid slides and closes the box completely to protect the soap from erosion by the water in the shower. It also stays in place well enough to put in a suitcase for travel and avoid getting soap residue on your other things. I have tested this box for the past 2 weeks and it has worked great! I hope you guys like it too. Print Settings Printer: Monoprice Maker Select (Prusa i3) Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Notes: Depending on your settings you might want to print at a higher infill to prevent water getting inside the walls of the box, but 20% was good enough for me.

Design Files

File Size

soapbox-jbeff99-grid.stl
1.6 MB
soapbox-jbeff99-lid.stl
554 KB
soapbox-jbeff99-box.stl
3.98 MB
soapbox-jbeff99.stl
6.13 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×