![Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80581 Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80581](http://assets.pinshape.com/uploads/image/file/80581/container_xiaomi-redmi-note-4g-mount-bracket-dock-3d-printing-80581.jpg)
![Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80582 Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80582](http://assets.pinshape.com/uploads/image/file/80582/container_xiaomi-redmi-note-4g-mount-bracket-dock-3d-printing-80582.jpg)
![Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80583 Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80583](http://assets.pinshape.com/uploads/image/file/80583/container_xiaomi-redmi-note-4g-mount-bracket-dock-3d-printing-80583.jpg)
![Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80584 Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80584](http://assets.pinshape.com/uploads/image/file/80584/container_xiaomi-redmi-note-4g-mount-bracket-dock-3d-printing-80584.jpg)
![Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80585 Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80585](http://assets.pinshape.com/uploads/image/file/80585/container_xiaomi-redmi-note-4g-mount-bracket-dock-3d-printing-80585.jpg)
![Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80586 Xiaomi Redmi Note 4G mount/bracket/dock 3D Print 80586](http://assets.pinshape.com/uploads/image/file/80586/container_xiaomi-redmi-note-4g-mount-bracket-dock-3d-printing-80586.jpg)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
SummaryThis mount is designed to mount a Xiaomi Redmi Note 4G onto a flat surface - wall, furniture, etc... The phone slides in through the top. I attached a micro usb 90 degree elbow with hot glue, which allows it to become a charging dock!Print SettingsPrinter: CreatornatorRafts: Doesn't MatterSupports: NoResolution: anyInfill: anyNotes: Can be printed pretty much with any settings, the correct way up. I printed mine with 0.4mm layers, 0.8mm nozzle, 12% infill. The screw holes are around 3mm. The countersink could be deeper, I had to use friction under the screw head to melt the hole a little deeper so it doesn't scratch the back of the phone.
Comments