Hvalpsund Train Ferry H0

SummaryI needed a trainferry for my model railway. The railway is in Denmark around 1960 (my childhood). I found this one on the internet in a old artikel from 2003. It was made in wood and plasticcard, so I try to make it in 3D. It is in scale H0 (1:87) and the tracks on deck is set in correct seice for this. As work progres, I will superstructure and some fittings. I have try to make a wood plaking on the deck.The rest is up to You. The picture are from the 2003 model. okt: Due to some problems with the rails (to close) I have made a rev. 1 to the upper hull. 2 new files added. Now with name tac. Added the 2 cabins marked L and R. They can be placed at both side. There is a marker in the side where to place them. okt Today added bridge, deck and roof and 2 new kabins with marks for bridge, chiemy and ventilator. The 2 last parts will come later. There is also a picture for asembly. This is taken from another ferry due to come when complete, but kabin and higher is the same. So now all parts are uploaded and You can see all parts except the lower parts of hull. dec A user had problems with the Kahyt´s. Have uploaded 4 files to solve this. These 4 files is the Kahyt L+R sliced into roof and wall parts. So now no need for support. The files is Kahyt_(R+L)_WOROOF and Kahyt(R+L)_ROOF At the moment I am work on habour parts. Will be ready before Christmas. I have just uploaded the first part of the ferry berth ( http://www.thingiverse.com/thing:1168701 ). More parts to come.Print SettingsRafts: Doesn't MatterSupports: YesResolution: 0,2 mmInfill: 15%Notes: I am printing in PLA and for Lower and upper Hull there is no need for support. Just print the lower part upside down. . Can be printed on all printers with at least a 150 x 150 mm table. This parts need support: Styrhus.stl Kahyt L+R.stl You need to print 2 pcs of the parts: Upper_hull.......stl Hull_a................stl Galje.stl The rest only 1 piece.