Latte Panda Dev Station - 3D Printed by Hotaman
1062
Printer Used
My Rating
My Thoughts
Printed perfect once I found the right temp, speed, and retraction for this PLA. The screen fits perfect (about 1mm clearance) and the flat cables are neat and tidy. Easy access to all of the connectors for my experiments. I stuck the antenna on the lower left front and it is working well in this position at my location. I printed the original which had 2.8mm mounting holes and the touch controller (on the flat cable) is touching the mounting boss. I ran a M3 tap through the holes so the screws fit nice. The current version has 2.9mm holes and the board has been moved 2mm to the right giving some clearance for the touch controller.
Settings
Print Time
7
hr(s)
20
min(s)
Material Brand
MakerGeeks Tiger Orange
Material Type
PLA
Layer Height
0.25
mm
Print Speed
60.0
mm/s
Extrusion Temperature
210.0
°C
Infill %
20.0
%
Comments