Optical Z-probe - 3D Printed by Hotaman
1492
Printer Used
My Rating
My Thoughts
The 10K resistor on the right was used for testing only, that's why one end is now loose ;) it was a temp pull-up for the sensor output. Works like a champ with Smoothieware on my Kossel Mini.
Settings
Print Time
20
min(s)
Material Brand
MakerGeeks
Material Type
PLA
Layer Height
0.2
mm
Print Speed
80.0
mm/s
Extrusion Temperature
210.0
°C
Infill %
25.0
%
Comments