SBOX (Smoke Stopper Box)

SBOX is an AIO smoke stopper. You may wire it up a couple ways as you see fit. Wiring diagrams are in the images.

Method One (3S-6S) - Voltage Selector / Low-High Selector - You'll need a SPDT and a DPDT switch

Method Two (5-6S Only) - Power / Low-High Selector  - You'll need (2) SPST (On/Off) switches. You can use SPDTs too if that what you can get.

There's 4 models with different hole sizes: 

19mm - 16mm (Tight fit) 

19mm - 12mm (In photos)

16mm - 16mm 

16mm - 12mm

Just some references on push buttons (LED 24v). When the LED is supplied with 12v, it still has good illumination. You can find the push buttons cheaper elsewhere. There are all kinds of styles out there.

SPDT Switches (May be used as a SPST): 

12mm Latching Push Button

16mm Latching Push Button

19mm Latching Push Button

DPDT Switches:

16mm Latching Push Button

19mm Selector Switch 2-Pos

Recommended:

Mountable XT60 Connectors

Bulb 3157

Bulb Sockets

Use at least a M2x6 bolt to secure the cover, if you so choose to use one.

You'll need to make a female to female XT60 cable for the output.