Designed by
Blackdog
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Design of a cruise ship.
Print details:
Bed heat: 60 degrees (not mandatory)
Nozzle draw: 0.2 mm
Infill: 30%
Support: Yes
Base/ plate adhesion: Yes
Take care while removing the supports, specially on the back side. There is also 2 small propellers and rudder in the design. If the supports are removed carefully and slowly then you can keep them intact in the final print. There is also anchor on the front of the ship.
Give it a try and upload the prints! Keep following for more awesome designs !!
Design Files
File Size
shipcruise.obj
767 KB
Comments