train track switch

Prints (0)

Description

train track switch

printed with a temp of 230 and bed temp 62 print speed 60mm/s filament: pla from by ctrl design layer height 0,2mm

its designed to fit on the .... train track.

look at the files witch ones you need. there is a different in left and right. print the files and then put it all together.

start with the switch slider put it in for 50% then you can hook on the switch part on the slider and slide it in place. now you can turn the model and put in the switch part connector. warning: when you put in the switch part connector it's hard to get it out again. now you can place the switch handle by clicking it in to place

enjoy your train track

Design Files

File Size

switch handle left and right by ctrl design.stl
87.9 KB
switch part connector left and right by ctrl design.stl
57 KB
switch part left by ctrl design.stl
129 KB
switch part right by ctrl design.stl
129 KB
switch slider left and right by ctrl design.stl
37.5 KB
train switch left by ctrl design.stl
2.45 MB
train switch right by ctrl design.stl
2.46 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×