No Prints Yet
Be the first to upload a Print for this Design!
The Flowing Bird Temple is a feeder for small Birds :-)
I printed this in PLA 0.2mm resolution and 0.4mm nozzle. The roof.stl is printed with support material generated by Cura. After that I Super Glued the parts together. See the pictures to see how the parts will fit together. I first glued the “base” parts. Then the “roof” & “wedge” parts. I also glued the M4x45mm bolt in place already, because later on (when all parts are together) it will be very difficult to do this. As last step I glued the “roof” , “base” and all the white parts together.
To make this model you at least need:
1X M4x45mm bolt and nut
2X mount pin.stl
1X mount ring.stl
1X mount wedge.stl
6X pillar 2L.stl
6X pillar 2R.stl
If you have any questions, feel free to ask :-)
Do you think I forgot something or made a mistake? Feel free to comment :-)
PS: the opening in the middle of the “base” is intensional. It's for letting the rain water out