![Conic Sections 3D Print 166230 Conic Sections 3D Print 166230](http://assets.pinshape.com/uploads/image/file/166230/container_conic-sections-3d-printing-166230.png)
![Conic Sections 3D Print 166228 Conic Sections 3D Print 166228](http://assets.pinshape.com/uploads/image/file/166228/container_conic-sections-3d-printing-166228.png)
![Conic Sections 3D Print 166229 Conic Sections 3D Print 166229](http://assets.pinshape.com/uploads/image/file/166229/container_conic-sections-3d-printing-166229.png)
![Conic Sections 3D Print 166231 Conic Sections 3D Print 166231](http://assets.pinshape.com/uploads/image/file/166231/container_conic-sections-3d-printing-166231.png)
![Conic Sections 3D Print 166232 Conic Sections 3D Print 166232](http://assets.pinshape.com/uploads/image/file/166232/container_conic-sections-3d-printing-166232.png)
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
A bit different then the multi-extruder model. This comes with a keyed base to assemble the various conic section pieces. There are a couple options with this design:
Single extruder, small volume and/or multi-color/material Print each part separately (or in like color/material sets) flat on the bed. I provided files of the prefix AK_ that should import level to the bed.
Single extruder, large volume single print Assemble all the pieces in Simplify 3D or Cura (right click and select all models, right click and select merge) into one object at the origin. The model is designed with a 0.15mm gap between all parts which is (depending on your settings and printer ability) seens as a 1-2 layer gap. This should allow all the parts to print and come apart save for the bottom most pieces. * **
Multi-extruder or Multi-material Same as single extruder, single print, but will be multi color/material and should come apart.
Comments