No Prints Yet
Be the first to upload a Print for this Design!
Summary Needed a place to mount my new e3d Titan extruder and wanted it to be close to the stock location, but also wanted it to be facing me, so I had to rotate the stepper 90 degrees from stock, and figured I could use one of the screw holes on the stock bracket with a longer (18mm M5) screw in it's place would let me get this situated mostly over the old bowden location and the stepper cleared the z-axis just fine! Note the indentation is for the existing screw in the Z-axis bracket so that you can keep all 3 holes filled and tight. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/3gw5K0z0nKi Print Settings Printer: Anet A2 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Notes: Printed with a 0.6mm nozzle and 3 walls. Supports shouldn't be needed for the small indentation but if you have problems with the bridging that's up to you. ymmv. The nozzle size shouldn't matter, I just didn't want to change it. :)