M8/M6/М5 lead screw bracket

Prints (0)

Description

Summary New lead screw mount, for M8 and M5 nuts. Mounting on V-SLOT by four M5x10 screw with washer Also there is two distance of center, 14mm is default, like in original D-Bot. And 21mm distance like Z-motors mount, for collinear location nut and motor pulley. This is part for D-BOT, but can be used in others CoreXY constructions. Customization Configuration of bracket (Lead_screw_bracket.SLDPRT Solidworks file) "nut_min_with" - is a width between parallel sides of nut. "screew_hole_diametr" - is diameter of hole, where will screw after nut. "nut_height" - is a depth of mount hole for nut. "screw_distance" - distance from v-slot to center of screw. Also there is preconfigured M5 and M8 sizes

Design Files

File Size

Lead_screw_bracket-M8-14mm.STL
196 KB
Lead_screw_bracket-M8-21mm.STL
200 KB
Lead_screw_bracket-M6-14mm.STL
50.9 KB
Lead_screw_bracket-M5-21mm.STL
198 KB
Lead_screw_bracket-M6-21mm.STL
52.2 KB
Lead_screw_bracket-M5-14mm.STL
194 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×