Prints (0)

Description

Summary PL: Robot drukujący - zainspirowany sphere o-botem od jjrobots oraz egg-bot (open source). Zastosowano modyfikacje aby można było drukować na: piłkach do ping-ponga, jajkach, małych i dużych piłkach do 11cm średnicy, regulacja wysokości ramienia pisaka, pisak z dociskiem sprężynowym połączonym z serwer. Całość oparta na ARDUINO LEONARDO, obudowa elementy montażowe wydrukowane z PLA temp.210st.C. Wysokość warstwy 0,3mm dla dużych elementów i 0,2mm dla małych elementów. Wypełnienie 20% dla dużych i 50% dla elementów dociskowych i drobnych. Szczegółowy opis znajduje się na http://jjrobots.com/sphere-o-bot-assembly-and-user-guide/ . Projekt obudowy montażu - własny. Miłej zabawy. EN: Robot print - inspired by the sphere o-bot from jjrobots and egg-bot (open source). Applied modifications to be able to print on: balls ping-pong, eggs, large and small balls to 11cm in diameter, height-adjustable shoulder pen, pen with spring-loaded connected to the server. The whole is based on ARDUINO LEONARDO, housing mounting printed PLA temp.210st.C. Layer height of 0.3 mm for large items, and 0.2 mm for small items. Ratio 20% for adults and 50% of the pressing elements and small. A detailed description can be found on http://jjrobots.com/sphere-o-bot-assembly-and-user-guide/. The design of the installation - your own. Have fun. Print Settings Printer Brand: RepRap Printer: SPECTRUM START BASIC and PRO (2printers) Rafts: No Supports: Yes Resolution: 0,3 and 0,2 mm Infill: 20% and 50%

Design Files

File Size

4_thrust_bearings_egg.stl
87.9 KB
5_pressure_adjustment.stl
501 KB
3_pen_holder.stl
909 KB
7_left_distance_engine_egg.stl
177 KB
10_pen_engine.stl
363 KB
6_left_handle_egg.stl
797 KB
8_right_handle_egg.stl
679 KB
11_arduino_leonardo_case.stl
775 KB
9_main_frame.stl
1.88 MB
1_pen_to_motor.stl
162 KB
2_pen_holder_servo.stl
374 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×