SCALEPRINT CB-18 BRICK CHIMNEY 00/H0

Prints (0)

Description

Summary Here we have the second of the chimneys for 00/HO models, this one is a brick texture and the base section is 10mm x16mm and the top is about 16mm x 20mm, and is about 30 mm tall with a capping. Is printed in 4 parts to get best detail print then glued together after printing. There are 4 different bases one for 45 degree roofs and one for 60 degree roofs.plus 45 degree sitting across the ridge plus there are 3 different caps that can be used on the top The chimney pots in the photo are not part of this thing. I use ABS Acetone mix to glue the parts to the plaster also to glue the plaster together, makes a very versatile glue. Print Settings Supports: Yes Resolution: 0.2 NOZZLE .1 LAYER HEIGHT Notes: I use supports on the 45 degree edges

Design Files

File Size

CB-18-CAP-SOLID-TOP-3.stl
118 KB
CB-18-CAP-ROUND-HOLES-2.stl
169 KB
CB-18-CAP-TUDOR-3.stl
145 KB
CB-18-CAP-RECTANGLE.stl
148 KB
CB-18-60-ROOF-RIGHT.stl
3.26 MB
CB-18-60-ROOF-LEFT.stl
3.31 MB
CB-18-60-ROOF-FRONT.stl
6.38 MB
CB-18-60-ROOF-BACK.stl
3.39 MB
CB-18-45-ROOF-RIGHT.stl
3.38 MB
CB-18-45-ROOF-LEFT.stl
3.48 MB
CB-18-45-ROOF-FRONT.stl
6.14 MB
CB-18-45-ROOF-BACK.stl
4.94 MB
CB-18-45-RIDGE-LONG-RIGHT.stl
3.96 MB
CB-18-45-RIDGE-LONG-LEFT.stl
4.05 MB
CB-18-45-RIDGE-LONG-FRONT.stl
6.39 MB
CB-18-45-RIDGE-LONG-BACK.stl
6.39 MB
CB-18-45-RIDGE-CROSS-RIGHT.stl
3.84 MB
CB-18-45-RIDGE-CROSS-LEFT.stl
3.84 MB
CB-18-45-RIDGE-CROSS-FRONT.stl
6.04 MB
CB-18-45-RIDGE-CROSS-BACK.stl
6.04 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×