No Prints Yet
Be the first to upload a Print for this Design!
SummaryThis christmas tree can be a very simple decoration for your house and you can do it yourself in a few steps. In the tree is a capacitor and an LED that is powered by a wireless apple watch charger. I had the idea of powering something wirelessly by the apple watch charger, so I made it come to life in this christmas decoration. A wire is made into a coil and connected to an LED and capacitor that helps the led shine brighter. The tree itself is a simple design that I "voronized" to look like a real tree. The bottom part is a stand for the tree itself and the charger. You coil the wire in to the little piece that fits inside the tree. There are two versions of the tree one with voroni effect, I used the website to convert my original design. To make this you need: An AppleWatch Charger, an LED and an AWG 24 wire (50 cm). If you want you can also use a 47 nF capacitor to make the led shine brighter. Note: Doesnt require soldering There shouldn't be a problem but the circuit might harm your charger so try it at your own risk. I didn't have an issue with it anyways. http://www.voronator.com/ Support recommended just at the bottom